Jump to content

Elddis Wisp - Ovation 450 Ct


turboace
 Share

Recommended Posts

The skylight (plastic window) above our toilet compartment has separated from the handles. It appears to have been attached by two small studs on each of the handles. The options appear to be 1) 'glue' the skylight back into place or 2) buy a complete assembly. Does anyone have any experience of this problem?

 

Many thanks

Link to comment
Share on other sites

The same thing happened on my Wisp Ovation a couple of years ago. I have drilled through the sky light and handle and bolted together with a stainless nut and bolt. During fittling of the bolt I used silicon sealer around the hole and bolt. Once fully assembled I covered the bolt head with plenty of sealer. In fact I checked around and have now performed the precedure around all contacts between handle and skylight. Good luck

Link to comment
Share on other sites

  • 2 weeks later...

I have just replaced the skylight in our van with a mini Heiki. If your skylight is the 400x400 I have one available complete with Fly screen and night blind. Send me a PM if interested

Link to comment
Share on other sites

 Share

×
×
  • Create New...