Jump to content

How To Remove A Thetford Toilet C200 From A Odessey 534


Tricia01
 Share

Recommended Posts

The toilet is held in place by screws in the base and also the water filler. In the base there are typically 4 screws, a pair each side into the floor. (The two rear ones may be hiden from view as they are at the end of the cassette runner). The water filler needs to be removed as this is screwed into the C200. I'm not sure if the toilet is then hanging on clips, so be prepared to lift it up the wall, rather than pull it away from the wall. Best of luck. Paul

Link to comment
Share on other sites

Hi Paul

Thanks for that it is now out! But having a nightmare with this wall.

The board is glued to the polystyrene and thats glued to the shell! its a nightmare

we have spent all morning trying to get the board off, the strut in the corner is also rotten, whats the best way off getting to that? as it seems like it has been fixed from the back before the fibre glass panel was put on? Will we need to take the back wall of the bathroom

out? My other half is very good at DIY but this is well stressing him out, he's out his comfort zone!

Link to comment
Share on other sites

 Share

×
×
  • Create New...