Jump to content

Cycloe Spare Wheel Carrier


MAGNUM DAVE
 Share

Recommended Posts

I have an Elddis Crusader Cyclone mounted on a BPW chassis, and fitted with a Powrwheel twin motor mover. Because of this fitment I have lost the use of my spare wheel carrier. Powrwheel produce a conversion kit to enable an Alko carrier to be fitted, but this is not usable on the Cyclone because of the warm air circulation hose in the chassis. There is rumour that the original BPW carrier can be mounted further back on the chassis. Has anyone come across this problem, with any advice to offer. Thanks, Dave.

Link to comment
Share on other sites

When I fitted my Mover to the rear of my Crusader I had to move the sparewheel cradle back so I made a extension bracket that bolted to the original holes in the chassis so not to drill new holes and screwed some new holes into the floor underneath .

 

 

 

Dave

Link to comment
Share on other sites

 Share

×
×
  • Create New...