Jump to content

Sargent Alarm As210


jennifernn
 Share

Recommended Posts

Remove the 4 screws from the outer casing securing it to the floor .

 

Turn it upside down and then remove the other 4 screws then the outer cae should slide off .

 

I had to replace a PIR for one of my friends and remeber the above procedure

Hyundai Santa Fe

 

SWIFT Oronsay 570

Link to comment
Share on other sites

Hi jennifernn, the battery is secured to the base with some double sided tape, if you gently prise the bottom of the battery it will lift. if you have any problems please do not hesitate to contact our technical people 01482 678981 I am sure they will have some tips?

 

Best regards

 

Ian Sargent

Link to comment
Share on other sites

Remove the 4 screws from the outer casing securing it to the floor .

 

Turn it upside down and then remove the other 4 screws then the outer cae should slide off .

 

I had to replace a PIR for one of my friends and remeber the above procedure

 

Hi

 

Contact Karl he will talk you thro the procedure

Sargent Electrical

 

Karl Hulse Technical Support

direct number is 01482 678981.

 

Dave

Link to comment
Share on other sites

 Share

×
×
  • Create New...