Jump to content

2010 Swift Charisma 545.......window rubber seal


Recommended Posts

Good afternoon

Following the annual service there is a damp issue at the bottom of the n/S front window and it is centrally located. I propose to change the seal.

I would appreciate confirmation of the width of the new seal...would it be 27 or 30mm and by any chance is there a part number that would denote the appropriate profile. I would prefer to buy all the necessary spare parts prior to removing the old seal.

Thanks in anticipation of your help. Alistair.

Link to comment
Share on other sites

Before you rush out to buy new rubbers, give them a good looking at to see if they are in good condition. If they are ok, you probably only need to clean off the old sealant, then apply fresh new sealant into the newly clean area between rubber and outer skin

Link to comment
Share on other sites

Hank you very much for your suggestion. My assumption was that when extracting the staples and inner bead the rubber would become useless. 
I suppose I would be happier replacing the rubber if I new the correct size.Alistair.

 

Link to comment
Share on other sites

 Share

×
×
  • Create New...