Robicfc Posted September 10, 2020 Share Posted September 10, 2020 Hi I'm trying to work out best way to install a instant hot water system to my build. Can I fit a instant hot/ cold tap 240v and run it from a shurflow pump. I'd rather fit electric if I can inc 12v tankless or them over sink hot water systems but unsure if they all need mains feed or would a shurflow pump do it. Thanks Quote Link to comment Share on other sites More sharing options...
Lost in the wilderness Posted September 10, 2020 Share Posted September 10, 2020 Check carefully the specifications for the heaters you are considering. they should show any minimum required flow rates, and minimum working pressure. You can then compare against the pump specification. The heater spec will also show the power consumption. I suspect this is going to exceed what you can obtain from site supply Overall, I doubt the pump is up to the job, and suspect the power needs will be excessive Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.