Jump to content

Sprite alpine 4 2010 psi?


paul2911
 Share

Recommended Posts

Hi,

 

does anyone know the correct psi for a sprite alpine 4 2010 model. 

 

All of the calculations are confusing me?

 

thanks 

Link to comment
Share on other sites

Your handbook figure is 60psi if your MTPLM is standard at 1230kg. If your van was replated to the max upper limit of 1250kg then the figure is 63psi. Is the correct figure not on the plate next to the entrance door?

Have a look at your handbook Here

2016 Volvo XC60 D5 (220) AWD,   2019 Swift Celeste 565SE

Link to comment
Share on other sites

My 2010 Alpine 4 is plated at 1209kg ... and gives a pressure of 54psi.

 

John

Link to comment
Share on other sites

5 minutes ago, Johnaldo said:

My 2010 Alpine 4 is plated at 1209kg ... and gives a pressure of 54psi.

Presumably not the 2010 model year to which the linked Swift service/technical data manual applies?  With 175R14 LI 99 tyres,

 

Yours is the 2011 model year... THIS Manual

2012 Bailey Pegasus 2 Rimini towed by 2019 Ford Galaxy Titanium X, 2.0 EcoBlue, 8 speed auto.

Link to comment
Share on other sites

11 hours ago, pfr said:

Your handbook figure is 60psi if your MTPLM is standard at 1230kg. If your van was replated to the max upper limit of 1250kg then the figure is 63psi. Is the correct figure not on the plate next to the entrance door?

Have a look at your handbook Here

So mine is 1230 so I should be putting 60 psi in? 

 

 

Link to comment
Share on other sites

At 1230kg MTLPM 60psi is the correct pressure. Just check that you also have the standard spec tyres as well (175 R14 99)

2016 Volvo XC60 D5 (220) AWD,   2019 Swift Celeste 565SE

Link to comment
Share on other sites

On 18/08/2019 at 23:09, pfr said:

At 1230kg MTLPM 60psi is the correct pressure. Just check that you also have the standard spec tyres as well (175 R14 99)

Amazing. Thank you. 

Link to comment
Share on other sites

 Share

×
×
  • Create New...