frontend Posted July 6, 2019 Share Posted July 6, 2019 Any one know how to remove the covers on the evolution auto mover .I have taken out the rubber grommets but can't see where it's Holding on need HELP please Link to post Share on other sites
Guest Posted July 6, 2019 Share Posted July 6, 2019 It just pull out, but check first because the latest one has been modified with a screw to hold it in place. Link to post Share on other sites
Rodders53 Posted July 6, 2019 Share Posted July 6, 2019 (edited) PowrTouch provide manuals and other useful documents on all their movers. https://www.powrtouch.com/powrtouch-support.html Including the how to remove / refit the cover, with pictures. But also consult the installation/operation manual for your exact model. The cover removal process is detailed in there also - possibly more accurately? Any retaining screw would be obvious, I think, with grommets removed based on the latest manual I have looked at. This thread reminds me, I should grease mine, so will need to remove the cover myself. Edited July 6, 2019 by Rodders53 2012 Bailey Pegasus 2 Rimini towed by 2019 Ford Galaxy Titanium X, 2.0 EcoBlue, 8 speed auto. Link to post Share on other sites
unclerichy Posted July 6, 2019 Share Posted July 6, 2019 I always resort to bashing mine from behind with a rubber mallet. No chance of just pulling Link to post Share on other sites
frontend Posted July 7, 2019 Author Share Posted July 7, 2019 Thanks all I will give a go Monday Link to post Share on other sites
Jiffy176 Posted July 7, 2019 Share Posted July 7, 2019 Old ones just pull off as they have a locator on the cross beam, newer ones just have the plastic clips with one that has a screw through the middle, very easy to tell apart. Link to post Share on other sites
Recommended Posts