Come on Stanley Posted March 28, 2019 Share Posted March 28, 2019 Hi guys, one of my bulbs has gone above my sink in the van and after pulling it open the bulb is actually a complete fitting and cannot, or doesn’t appear to be able to be separated from the wiring. Does anybody know how to replace these? Seems crazy that you cannot just replace the bulb?? Link to comment Share on other sites More sharing options...
bconnelly Posted May 8, 2019 Share Posted May 8, 2019 Hi Stanley. You don't seem to have much of a response so here's my tuppence worth. I had a similar fitting in a previous van and decided the best solution was to do away with it, snip or undo the wires and replace the whole module with a simple G4 bulb received like the one below. I opted to fit LED bulbs rather than Tungsten but that's up to you. There are also various COB options available on eBay that would make equally good replacements and they're inexpensive. Hope that helps... Hobby 575 VIP (2010) towed by Jaguar XF R-Sport (2018). Link to comment Share on other sites More sharing options...
Stan1889 Posted September 2, 2019 Share Posted September 2, 2019 On 08/05/2019 at 15:04, bconnelly said: Hi Stanley. You don't seem to have much of a response so here's my tuppence worth. I had a similar fitting in a previous van and decided the best solution was to do away with it, snip or undo the wires and replace the whole module with a simple G4 bulb received like the one below. I opted to fit LED bulbs rather than Tungsten but that's up to you. There are also various COB options available on eBay that would make equally good replacements and they're inexpensive. Hope that helps... Thank you I will have a look at this option Link to comment Share on other sites More sharing options...
Recommended Posts