Flyingscotsman01 Posted June 2, 2017 Share Posted June 2, 2017 Can anyone tell me where the fuse for the extractor is located, I believe it may have blown when accidentally reversed fan when moving in opposite direction. Link to comment Share on other sites More sharing options...
David P Posted June 2, 2017 Share Posted June 2, 2017 (edited) Hi and welcome to the forum. Not to put a damper on the thread. I have done the same, result fan total right off. I hope in your case it is not! Have a look at the consumer unit/fuse box? Edited June 2, 2017 by David P Swift Elegance 480, towed by a Mitsubishi L200 Barbarian X series 6. Link to comment Share on other sites More sharing options...
Rodders53 Posted June 3, 2017 Share Posted June 3, 2017 Wiring diagram in the Service Handbook manual will tell you. Download from Swift to be sure it matches your van. But my old pdf copy says it is fuse 6, and the only thing supplied from it. Should be on the main pdu iirc? 2012 Bailey Pegasus 2 Rimini towed by 2019 Ford Galaxy Titanium X, 2.0 EcoBlue, 8 speed auto. Link to comment Share on other sites More sharing options...
Discoil Posted July 12, 2017 Share Posted July 12, 2017 I er er think I did this to my coachman . I sent the PCB board to Metronicshttp://www. metronics. co. uk/ and had it repaired Land Rover Discovery S2 Td5 Coachman VIP 520/4 ( 2013 ) Link to comment Share on other sites More sharing options...
Recommended Posts