den123 Posted June 26, 2016 Share Posted June 26, 2016 Have bought new microwave daewoo. To replace broken one. Have put it in but can't locate the holes to put screws in do I have to drill holes in microwave so screws will go in thanks Quote Link to comment Share on other sites More sharing options...
BillySmart Posted June 26, 2016 Share Posted June 26, 2016 The Daewoo microwave in my Barcelona died recently after very light use. On advice from CT posters, I just bought another that fits in the same hole and I remove and secure it before towing. I'm no sparky and even if I was I'd be wary of drilling or putting screws into one without knowing the innards well. Quote If at first you don't succeed. ... redefine success. Link to comment Share on other sites More sharing options...
WispMan Posted June 26, 2016 Share Posted June 26, 2016 Wild horses would never ever persuade me to drill holes in the base of a microwave. Quote Graham Unless otherwise stated all posts are my personal opinion Link to comment Share on other sites More sharing options...
Pebble Posted June 26, 2016 Share Posted June 26, 2016 The Daewoo microwave in our Lunar Delta Ti was simply wedged in place and that was from the factory. Quote 2019 Adria Adora Thames Link to comment Share on other sites More sharing options...
WispMan Posted June 26, 2016 Share Posted June 26, 2016 Travel with it on the floor and put it in the top cupboard whilst on site. Quote Graham Unless otherwise stated all posts are my personal opinion Link to comment Share on other sites More sharing options...
den123 Posted July 12, 2016 Author Share Posted July 12, 2016 All screwed in as it should. Be no problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.