Search the Community
Showing results for tags '460/4'.
Found 1 result
I've read many items relating to mixer taps leaking but none seem to fit my problem. Which is.... This mixer tap - I think is the Carafax L180 (Bailey Ranger Series 5 460/4) - leaks from around the lower central part that swivels (the part with the output spout on). I've taken it apart as much as I can, removed the cartridge, removed and cleaned the rubber insert and cleaned the brass part it fits on to. Put it all back together, tightened the main brass nut and yet it still leaks - not a lot, but enough to be a problem. Could it be that the cartridge is at fault, i.e. would the rubber insert being compressed over the past 12 years, be the cause of this leak? Or is it a case of having to replace the tap as a complete unit? If so, how on earth do I get to the fixing nut that holds the tap in place? I've gone in from the (outside) upper fridge vent and seen where the hot/cold pipes feed onto the tap tails (so they're not an issue to undo); the sink that would give fairly easy access) appears to be fairly rigidly fixed in place by the solvent welded waste pipework. I could remove the waste central screw but it all looks to be pretty solidly gunked up with Plumber's Mate or something similar and I don't really want to disturb this and cause further issues when all put back together. Again, from the outside vent, I can see a metal plate through which the pipes feed through - can this be easily removed (I can see one screw and feel two/three others) - would this be the way in to the base of the tap? Any thoughts, hints or tips would be gratefully received to remedy this problem. Many thanks in advance. Dave