Jump to content

stedavey

Approved Member
  • Content Count

    30
  • Joined

  • Last visited

About stedavey

  • Rank
    Over 10 posts

Profile Information

  • Gender
    Male
  • Location
    Nottinghamshire
  • Interests
    Astronomy
  • Towcar
    Bmw 2 Series Gran tourer
  • Caravan
    bailey pageant provence

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. All done now. Here's what I did. I came from the battery directly with a 2mm - 25Amp cable strait I to a fuse board. ( each connection I've fused at 5amp ) From the fuse board I ran 2 separate cables for two separate double USB ports again with 25amp cable strait into a switch then into the USB sockets. I know 25amp cable is over kill but hey safe that way right ? The USB ports have a 1amp port and a 2. 1amp port so only ever pulling 3. 3amps at a time . ... Hope that makes sense.
  2. No they are mains powered. I'm fitting 12v for off grid use
  3. The cable is rated 11amp the fuse will be 10amp or 5 amp  going to run one cabe from battery to 10amp fuse then from fuse to a switch ( to save battery drain when USB not in use as it has a light on it ) then switch to USB. . ... and negative strait from battery to USB 
  4. Yea was going to run one cabe from battery to 10amp fuse then from fuse to a switch ( to save battery drain when USB not in use as it has a light on it ) then switch to USB. .... and negative strait from battery to USB
  5. Hi guys a little advise needed please. I've bought some USB port to add to my caravan ( you know what kids are like for charging phones and iPads etc ) To install these I bought some cable from Ebay but now its come it looks a little small and kinda worrys me although it might be right but just wanted to check what you all say. The cable I ordered is Thin wall 0. 5mm 12v 11amps This is the Ebay item number 142493025743 Does that sound about right ? Thanks in advance
  6. So there should be a screw off cap behind the sticker then ?
  7. Daft question probably but What Is this I've circled on pic
  8. I’ve joined C&CC and my first ever rallie was on hook up that’s probably what’s making me ask if you know what I mean
  9. Hi all is there any way of finding out what caravan & camping rallies have electric hook up ? I’m aware that most rallies do not and I’m aware they are THS but I do know SOME do have hook up’s. The thing is how can I find out which ones ? Thanks in advance 🙃🙃🙃
  10. So I'm due to go away tomorrow 5/7/18 and this will be the first time going away with a decent sized caravan that has a working fridge. So my question is do I stock my fridge before setting off and if so should I stock it with everything I need or just the essential things?
  11. Hi all, my caravan is a Bailey pageant provonce series 6 and upon checking the fuses I noticed a fuse for the alarm system . ..... problem is I don't have an alarm system in my caravan to my knowledge . .... Can anyone inform me to why I have the fuse in there is I don't have the system for it Please thanks in advance
  12. I do have a fuse for a alarm system but no actual alarm fitted :/ hmm I will let you know as soon as I change it over and see how it goes
  13. I have been having issues with my PCB in the consumer unit and noticed that on the front there is a burn mark from one solder to another I have got a new one on order should be here tomorrow. Am I right by thinking that the burn between could be causing the bridge and keeping the lights master switch on !! ???
  14. Ok so replaced rocker no joy it does nothing . ..... the panel linked in this post is for a ranger and I have a Bailey pageant provonce s6
  15. Ok think I might get a new rocker switch today and give it a go because it dose not do anything at all so I will update later on to let you know it the new switch has any affect
×
×
  • Create New...