imtaylor Posted July 30, 2015 Share Posted July 30, 2015 This might be a long shot but we are currently on holiday at Camping st avit de loisir (dordogne) and moving to les alicourts (SE of Oreleans) tomorrow. Our aqua roll mains adaptor has packed in ( long story but down to site maintenance guy) and struggling to get replacement Sent from anywhere in France. Does anyone know a place close to either that might sell aqua roll mains adaptor? Or is there an English pays shop or similar? Failing either of these what's the quickest way to get a replacement Sent from the UK? Quote Link to comment Share on other sites More sharing options...
Glen and Les Posted July 30, 2015 Share Posted July 30, 2015 Don't let it spoil your holiday. Use the aquaroll without it and you may find somewhere at your next stop where you can get it sorted. Quote 2019 Ford Kuga 2. 0 (150 bhp) AWD Manual and 2022 Coachman Acadia GTS 565. Link to comment Share on other sites More sharing options...
CommanderDave Posted July 30, 2015 Share Posted July 30, 2015 As said can you not put the cap back on the side and just put the hose in the top and fill it manually to not spoil your holiday . 5 minutes every evening just to keep it filled ? Dave Quote Jeep Commander 3. 0 V6 CRD Isuzu D- Max Utah Auto Elddis Crusader Storm 2000 Kgs, Unipart Royal Atlas Mover . Link to comment Share on other sites More sharing options...
gumdrop Posted July 30, 2015 Share Posted July 30, 2015 (edited) http://www. aquaroll. com/ Try e-mailing aquaroll or telephoning of course they will probably bend over backwards to help http://www. care-avan. co. uk/Mains-Water-AV. html http://www. diy. com/departments/torbeck-fill-valve/284468_BQ. prd just for the picture a torbeck side entry valve assembly Bye the Bye, what has actually broken? (a photo would help) if it is the hose adaptor or float wouldn't a plumbers/general store or even a garden-centre be able to help, even just for advice Edited July 30, 2015 by gumdrop Quote Link to comment Share on other sites More sharing options...
JCloughie Posted July 30, 2015 Share Posted July 30, 2015 Strangely I think the French use british standard pipe thread, so any small float valve should do from Mr Bricolage. You then need a converter to Hoselock. Again, same standard in France. John Quote Volvo V70 D3 SE (was Peugeot 4007, SsangYong Korando), Pulling a Lunar Clubman SI 2015. If you are depressed, you are living in the past. If you are anxious, you are living in the future. If you are at peace, you are living in the present. Link to comment Share on other sites More sharing options...
imtaylor Posted July 30, 2015 Author Share Posted July 30, 2015 Thanks, it certainly won't ruin the holiday you are right but without it we'd be topping up at least 3 times a day so is an inconvenience at best. Have managed to speak to someone who might be bringing one down to the area in saturday so there is hope! What happened was the maintenance guy came to the pitch because the tap wasn't working. He fixed it but turned the tap full on and I think the pressure has knackered the mechanism. Top and bottom of it is now is that we literally get a small trickle of water out of the mains adaptor and the shut off float doesn't appear to work. I've pulled it apart as best I can but can't seem to find anything wrong with it. Any suggestions very very gratefully received! Quote Link to comment Share on other sites More sharing options...
Rob-T Posted July 30, 2015 Share Posted July 30, 2015 As JCloughie says, go along to local M. Bricolage and get a small Torbeck valve and replace your faulty one. Quote Link to comment Share on other sites More sharing options...
Rob-T Posted July 30, 2015 Share Posted July 30, 2015 As JCloughie says, go along to local M. Bricolage and get a small Torbeck valve and replace your faulty one. Just had a quick look on the Bricolage website, a small side float valve will cost you 7. 20 euros Quote Link to comment Share on other sites More sharing options...
Marks Posted July 30, 2015 Share Posted July 30, 2015 I suggest you don't worry about it, in the big picture, it's such a minor issue. Quote Land Rover Discovery and Conquerer 630 Link to comment Share on other sites More sharing options...
imtaylor Posted August 1, 2015 Author Share Posted August 1, 2015 Got it sorted with a float valve from a nearby bricolage place. 1 Quote Link to comment Share on other sites More sharing options...
frazerg Posted August 1, 2015 Share Posted August 1, 2015 Hi I had a friend make one for his aquaroll, basically cos he's as tight. Anyway he bought a domestic float valve and put it on the aquaroll cap and made a float out of a small plastic pop bottle,screwed onto the floatvalve by putting a hole in the pop bottle cap, so it would fit through the cap hole. He reckoned it worked as well as the proper one. Quote Frazer Kia Sportage towing Lunar Ultima SE Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.